Fender Telecaster Deluxe Left Handed Vintage Wiring Harness

Description

Fender Telecaster Deluxe Left Handed Vintage Wiring Harness

This Pre-wired Fender Telecaster Deluxe Left Handed Vintage Wiring Harness is designed for replacing old electrics or upgrading the electronics of imported models or for use on DIY Kits. We take a massive amount of care and attention when putting our Fender Telecaster Deluxe Left Handed harnesses together. Everything is fully tested before being posted to you.

This is a Professional Telecaster Deluxe Left Handed Wiring Harness using the very best in components to enhance the quality of tone and sound output from your guitar.

Components
Premium 500k CTS Potentiometers x 4, Left Handed / Reverse Taper Split Shaft – Supplied with Brass Solid Shaft Conversion Sleeves.
Capacitor x 2, Size 0.022uF / Sprague Orange Drop.
20AWG Tinned copper ground.
Pots supplied with Nut, Flat Washer & Locking Star Washer.
You are welcome to Contact Us with your custom requirements.

Controls
Volume 1 – Bridge.
Volume 2 – Neck.
Tone 1 – Bridge.
Tone 2 – Neck.

Will this fit my guitar?
Our pre-wired Fender Telecaster Deluxe Left Handed Vintage Wiring Harness is wired to fit genuine Fender models. If installing into an imported model / DIY guitar kit you will need to ensure the Potentiometer holes will take CTS pots (approx 10mm). This can be done using a round file or carefully with a 10mm drill.

Centre to centre measurements between components
Centre of neck volume pot and neck tone pot – 53mm.
Centre of neck volume pot and bridge volume pot – 40mm.
Centre of neck tone pot and bridge tone pot – 40mm.
Centre of bridge volume pot and bridge tone pot – 53mm.
Measurements can sometimes vary slightly on some Telecaster Deluxe Left Handed models, so we allow plenty of movement in wire lengths between components to allow for a comfortable fit.
If your measurements are different from the above, please let us know and we will build your harness to your specifications.

Installation, Wiring Diagram and Support
Please see our Support Page for wiring diagrams and fitting instructions.
We have made it as simple as possible to install your Fender Telecaster Deluxe Left Handed Vintage Wiring Harness with a fitting guide and simple to follow wiring diagram.
We also offer full support should you need it.

Order Times
We make everything to order and the turnaround time for a Fender Telecaster Deluxe Left Handed Vintage Wiring Harness is 48 hours.

You may also require the following to complete your Telecaster Deluxe Wiring Harness:

All Available on our Electrical Components Page

Fender Telecaster Deluxe Left Handed Vintage Wiring Harness, Telecaster wiring Loom