Jackson HH Wiring Kit

£46.50 – £52.50

We build your Jackson HH Wiring Kit to order using professional fully tested electrical components.

Includes wiring diagram & installation guide.

Description

Jackson HH Wiring Kit

To fit models with 2 Humbuckers

This Pro Jackson HH Wiring Kit is designed for replacing old electrics or upgrading the electronics of imported models or for use on DIY Kits. We take a massive amount of care and attention when putting our Jackson HH Wiring Kits together. Everything is fully tested before being posted to you.

This is a Professional Jackson wiring Kit using the very best in components to enhance the quality of tone and sound output from your guitar.

Components
Premium 500k CTS Potentiometer x 2, split shaft.
Oak Grigsby 3 way lever switch.
Capacitor / Sprague Orange Drop, Size 0.022uF.
Switchcraft Jack Socket.
Gavitt USA made cloth covered 22AWG wire.
Tinned-copper “buss” ground wire.
Heat Shrink Tubing.
Pots supplied with Nut, Flat Washer & Locking Star Washer.
You are welcome to Contact Us with your custom requirements.

Treble Bleed Option
A Treble Bleed takes the high treble tone frequencies out of the circuit at the volume pot and puts them back in the circuit as the signal leaves the volume pot. The result is a smoothed out treble and a more uniform tone from 1 to 10. Reducing the treble drop out as the volume pot rolls off. If you like the idea of retaining treble as you roll your volume pot down, then a treble bleed is for you.

Controls
Master Volume Control.
Master Tone Control

Switching
Position 1 – Bridge pickup
Position 2 – Neck & Bridge pickup
Position 3 – Neck pickup

Will this fit my guitar?
Our Jackson HH Wiring Kit is designed to fit genuine Jackson models. If installing into an imported model or a DIY guitar kit you will need to ensure the Potentiometer holes on the Pickguard or body will take CTS pots (approx 10mm). This can be done using a round file or carefully with a 10mm drill.

Installation, Wiring Diagram and Support
Please see our Support Page for wiring diagrams and fitting instructions.
We have made it as simple as possible to install your Jackson HH Wiring Kit with a fitting guide and simple to follow wiring diagram.
We also offer full support should you need it.

Order Times
The turnaround time for a Jackson HH Wiring Harness is 48 hours.