Epiphone Sheraton Left Handed Vintage Wiring Harness

Description

Epiphone Sheraton Left Handed Vintage Style Wiring Harness

This pre-wired Epiphone Sheraton Left Handed Vintage Style Wiring Harness is designed for replacing old electrics or upgrading the electronics of imported models or for use on DIY Kits. We take a massive amount of care and attention when putting our Epiphone Sheraton Left Handed Harnesses together. Everything is fully tested before being posted to you.

This is a Professional Sheraton Left Handed Wiring Harness using the very best in components to enhance the quality of tone and sound output from your guitar.

Components
Premium 500k CTS Potentiometers x 4. Reverse Taper, Standard Length Shaft with Split Shafts.
Switchcraft Toggle Switch – Choice of switch knob colour is included, Amber, Cream or Black.
Switchcraft USA Jack Socket.
Capacitor x 2, Size 0.022uF / Sprague Orange Drop
Gavitt USA Braided Wire.
Jack Socket and Pots supplied with Nut, Flat Washer & Locking Star Washer.
You are welcome to Contact Us with your custom requirements.

Controls
Volume 1 – Bridge.
Volume 2 – Neck.
Tone 1 – Bridge.
Tone 2 – Neck.

Switching
Position 1 – Bridge Pickup.
Position 2 – Bridge & Neck Pickup.
Position 3 – Neck Pickup.

Will this fit my guitar?
Our pre-wired Epiphone Sheraton Left Handed Wiring harness is wired to fit all models. If installing into an imported model or a DIY guitar kit you will need to ensure the Potentiometer holes will take CTS pots (approx 10mm). This can be done using a round file or carefully with a 10mm drill.

Centre to centre measurements between components
Centre of Switch to neck volume pot – 45mm.
Centre of neck volume pot to centre of neck tone pot – 70mm.
Centre of neck volume pot to bridge volume pot – 70mm.
Centre of bridge volume pot to bridge tone pot – 70mm.
Centre of neck tone pot to jack socket – 66mm.
Measurements can sometimes vary slightly on some Sheraton Left Handed Models, so we allow plenty of movement in wire lengths between components to allow for a comfortable fit. If your measurements are different from the above, please let us know and we will build your harness to your specifications.

Installation, Wiring Diagram and Support
Please see our Support Page for wiring diagrams and fitting instructions.
We have made it as simple as possible to install your Epiphone Sheraton Left Handed Vintage Wiring Harness with a fitting guide and simple to follow wiring diagram.
We also offer full support should you need it.

Order Times
We make everything to order and the turnaround time for a Epiphone Sheraton Left Handed Vintage Wiring Harness is 48 hours.

Epiphone Sheraton Left Handed Vintage Wiring Harness